If you wish to see the Earth from space, or to visit anywhere else in the solar
system, use the Location panel.
RedShift lets you set your location anywhere, relative to any object in the Solar System,
or anywhere in space within the Solar System (within 9,999 astronomical units of the Sun).
RedShift provides pre-set options for setting your location relative to an object.
By default, RedShift sets your initial location to London, England, looking south. You can
change this to your own home by using Preferences.
You can set a new location using:
The Location panel
The Observer sub-panel
The Choose location dialog (Control menu; for Earth's surface only)
You can move your location by fixed steps in any direction relative to an object in the Solar
System using The Control panel (Control position mode)
Using the Location panel, you can:
Use the Location type menu to set a new location mode
Open the Observer sub-panel
Use the Select location body: pop-up menu to choose a different Solar System body to be
located on or to set your location in space (Heliocentric)
Use the Select surface feature: pop-up menu to choose a named location when on a Solar
System object which has named surface features. The named surface features are cities
and observatories on the Earth and landing sites and features on Venus, Mars and the Moon.
Enter new longitude and latitude co-ordinates
Change your distance (from the current location body)
Click the re-size button
to display/hide the co-ordinate and height/distance boxes.
Location mode defines your type of motion through the space relative to an object
(such as a planet, moon, comet or spacecraft). If you set time running
using the Control time panel, your direction of view will, by default, remain fixed relative
to the selected co-ordinate system (planetographic, orbital or heliocentric.
. Use the drop down menu in the Location panel to choose one of four location modes:
Observe from surface mode - use for observing from a fixed location on (or above) the
surface of a body (the normal mode for a terrestrial observer)
Observe from surface mode use the planetographic co-ordinate system:
Latitude is measured in degrees north and south of the planet's equator. The zero point is
the intersection of the planet's equator and the zero meridian (uniquely defined for each
object which has a surface)
Height is measured from the body's surface.
Space: track surface mode - use for observing a planet or moon's surface. As time changes
the observer travels through space with the selected body whilst tracking a fixed location
on the surface of the body
If you are interested in viewing the surface maps of objects (such as planets and moons)
in greater detail open the Location panel fully (click the re-size button in the top right
of the panel) and then choose Map from the height pop-up menu.
Space: track surface use the planetographic co-ordinate system:
Latitude is measured in degrees north and south of the planet's equator. The zero point is
the intersection of the planet's equator and the zero meridian (uniquely defined for each
object which has a surface)
Height is measured from the body's surface.
Space: track body mode - use for observing a planetary system, or an body such as a comet
or spacecraft. As time changes the observer travels through space with the selected body
whilst tracking the center of the body. The observer's position is fixed in relation to
the body's orbit (in the case of a planet or moon, the body will rotate beneath the observer)
Space: track body mode uses the orbital co-ordinate system:
Latitude is measured in degrees north and south of the orbital plane.
Latitude in the orbital system is the angular distance, measured eastwards, along the orbital
plane from the zero point. The zero point is the direction to the gravitational center (the
Sun for planets, a planet for its satellites, etc.)
Distance is measured from the body's center.
Space: heliocentric - used for
observing the Solar System
It is useful to display the Ecliptic plane (Filters, guides, ecliptic) when viewing the
solar system in Heliocentric mode. This provides a frame of reference to help you visualize
your position.
Space: heliocentric uses the Heliocentric (ecliptic) co-ordinate system:
Latitude is measured in degrees north and south of the ecliptic.
Latitude in heliocentric system is the angular distance, measured eastwards, along the
ecliptic from the zero point. The zero point is the northern Vernal equinox.
Distance is measured from the Sun.
TIP: to get a better understanding of these modes, choose Motion preview from the Control
menu or click the Motion preview sub-panel button
in the TRACK AIM panel to open the sub-panel and play the animations illustrating your
present location mode and aim.
Clicking the Observer button you open the Observer sub-panel.The simplest way to change
your location relative to a selected object is to use the Observer sub-panel.
Rotate the mini-globe by dragging it. Change your location by dragging the yellow stick
marker. The co-ordinates of the new location (displayed in the upper right corner) are
expressed using the current co-ordinate system (for example in Space: track body mode
planetographic co-ordinates are displayed).
Change the distance from the center of an object or height above its surface using the slider
at the bottom of sub-panel. Drag slider to change distance from the planet. Arrows allow
fine adjustment of distance.
Use the Shadow and Grid buttons to show/hide a shadow (phase) and grid on the mini-globe in
Observer sub-panel. Note that displaying a shadow and grid on the mini-globe does not affect
the display settings for the object in the sky window. The globe will respond faster with
shadows and grid off.
Click the Find button in the Observer sub-panel to search for a named site in the gazetteer
for the currently selected object. The Find dialog lets you choose from a list of towns and
cities or a list of well known observatories. Gazetteers are also provided for the Moon, Mars
and Venus (instead of towns, cities and observatories, the gazetteers list geographic features
and landing sites of space missions).
The Select location body box displays the name of the currently selected body, relative to
which your position is calculated.
RedShift 3 lets you set your location anywhere on Earth or any other planet, moon, comet,
asteroid or spacecraft. You can also set a heliocentric location (i.e. anywhere in space
near the Solar System).
Select a new body or select a heliocentric location
using the Select location body: pop-up menu. If the body that you require isn't on the menu,
then select Find from the pop-up menu, and choose to locate on it from its entry in the Find
dialog. NB: you may need to make the body visible using the Filter dialog in order to see it.
Note that selecting a Heliocentric from this menu also selects Space: heliocentric mode in the
Location type menu. You must select an object using the Select location body menu before you
can choose a Location type relating to the surface of an object.
Where a named site (feature) has been selected, the name is displayed in the Surface feature
box.
Select a new viewing location on the currently selected body by choosing one of the named
sites from RedShift's extensive gazetteer. The Select surface feature pop-up menu contains a
list of towns and cities and well known observatories on Earth. Gazetteers are also provided
for the Moon, Mars and Venus (instead of towns, cities and observatories, the gazetteer lists
geographic features and landing sites of space missions). To find more features, choose Find
location from the surface feature pop-up.
Longitude and latitude co-ordinates correspond to the selected Location type:
Planetographic - for Observe from surface or Space: track surface modes,
Orbital - for Space: track surface/body modes (indicated by an 'o' after lat and long)
Heliocentric - for Space: heliocentric mode.
You can enter new co-ordinates by editing the fields in the longitude and latitude box.
Each value in the box operates as a separate field. Click
a value to select it then type new values. Use the tab key to step through each of the
longitude and latitude values. Press Return/Enter to apply your new location settings.
Longitude/latitude are set using three fields: degrees, minutes, and seconds when using
Space:Track body and Heliocentric modes or direction (W, E, N, S) when using Observe from
surface and Space:Track surface modes.
Type W or E to the right of the longitude field (or use the pop-up menu) to change
between West and East longitudes. Type N or S to the right of the latitude field (or use the
pop-up menu) to change between North and South latitudes.
Choose User's home to change location to Earth's surface, at home location.
Choose Inverse current to change location by 180 degrees lat/lon.
Use Relative... in the co-ordinates pop-up menu to choose pre-set directions from which to view
an object.
For Observe from surface and Space: track surface location modes choose one of the
six pre-set positions in relation to the object. For example, for a planet:
North pole: directly above the north pole of the object
South pole: directly above the south pole of the object
Equator/0: directly above the equator at the zero meridian
Equator/180: directly above the equator at longitude = 180
Equator/90W: directly above the equator at longitude = 90W
Equator/90E: directly above the equator at longitude = 90E
For Space: track body location mode choose one of the six pre-set positions in relation to
the center of orbit (the Sun for a planet, the planet for one of its moons). For example,
for a planet:
Inward: between the Sun and the planet. (Orbital latitude and longitude = zero)
Outward: with the planet between you and the Sun (always in shadow unless phases are switched
off). (Orbital latitude = 0; longitude = 180)
Leading: in front of the planet in its orbit (Orbital latitude = 0; longitude = 270)
Trailing: behind the planet in its orbit (Orbital latitude = 0; longitude = 90)R>
Above: looking down on the northern hemisphere. (Orbital latitude = +90)
Below: looking up at the southern hemisphere. (Orbital latitude = -90)
The field changes between Height when using Observe from
surface and Space:Track surface modes and Dist when usingSpace:Track
body and Heliocentric modes.
When your
location is set on the surface of a planet or moon, height can be entered in kilometres above
the surface. In Space: track surface/body modes the distance is measured in kilometres,
or thousands/millions of kilometres. In heliocentric mode, distance is measured in
astronomical units (a.u.) or in millions of kilometres from the Sun.
Use the height/distance field to enter new values.
Click the current value to select it then
type new values. Use the height/distance pop-up menu to select distance units. Press
Return/Enter to apply your new height/location settings.
Use distance = zero to observe from the center of the selected object.
|
|